During this exhibition, Gofront showcased the following models to the market:

1、 Ultra low bath ratio full mode yarn dyeing machine GF241XLB series: suitable for dyeing cylinder yarn, warp, loose cotton (wool), zipper, and wool top.

Product features:

1. Ultra low bath ratio 1:3 unidirectional cyclic staining mode and low bath ratio 1:4.5 bidirectional cyclic staining mode.

2. The patented ultra-low bath ratio circulating main pump ensures the quality of dyeing yarn with ultra-low bath ratio, with a one-time dyeing hit rate of over 90%, effectively shortening process time, reducing energy consumption, lowering operating costs, and improving dyeing machine efficiency. 3. A patented pressure dehydration system can reduce the energy consumption of yarn drying.

2、 Full mode ultra-low bath ratio dyeing machine GFALA series: capable of dyeing all lightweight to heavy fabrics ranging from 60-550 GSM, such as knitted, woven, home textiles, automotive interior fabrics, various high elasticity and high-density fabrics, all cotton, various synthetic fibers, various blends, plain weave, stretcher, hoodie, Roman fabric, Tencel, modal, etc., especially skilled in dyeing various difficult and high-quality fabrics. 

Product features:

1. A machine with three types of nozzles: atomization nozzle, gas-liquid nozzle, overflow nozzle. It combines the characteristics of three dyeing modes: mist, vapor liquid, and overflow, achieving full mode dyeing with three sets of nozzles and six sets of combinations.

2. The patented ultra-low bath ratio dyeing solution circulation system can achieve a bath ratio of 1:2.8 in aerosol dyeing mode, 1:3.5 in gas-liquid dyeing mode, and 1:5 in overflow dyeing mode.

3. Equipped with a built-in lifting wheel and nozzle, the fabric travel is shorter, the tension is ultra-low, and the fabric running speed is faster, greatly reducing fabric fuzzing, scratches, and breakage, and improving dyeing quality.

3、 Non crease low bath ratio overflow dyeing machine GOXLC-SUPER series: suitable for medium to light to heavy fabrics of 80-600 GSM, such as knitted, woven, home textiles, automotive interior fabrics, and cotton; Various blends, polyester cotton interweaving, cotton covered silk, silk covered cotton plain weave or stretcher, double-sided hoodie fabric, cotton polyester nylon chicken cloth, human cotton, Roman fabric and other high difficulty and high quality fabric types are required.

Product features:

1. Multiple patented designs with a bath ratio as low as 1:3.8-5; The patented water-saving water tank design saves 1 ton of water per cylinder cloth.

2. The specially designed dyeing solution uniform mixing conveying system and high-pressure nozzle can also ensure the even dyeing effect of the fabric during ultra-low bath ratio dyeing.

3. The patented design of the new fabric guide allows the dyed fabric to be fully relaxed after passing through the nozzle, avoiding excessive entanglement of the rope like fabric. It has a good unfolding state before entering the fabric groove, and with the help of a low position roller and a specially designed internal fabric placement device, it can greatly reduce creases on the fabric surface. 4. The large capacity variable load distribution groove design easily achieves a load capacity of 350-400KG/pipe.

4、 The GFLD series of low bath ratio excellent dyeing machines is suitable for medium to light to heavy fabrics of 60-380 GSM, especially for high-density, ultra-fine denier fabrics, nylon, polyester, acetate fiber, modal, polyester, Tencel, T/R, T/C, all cotton, artificial cotton, filament and other fabrics.

Product features:

1. Adopting advanced quick change cup type high flow main nozzle or adjustable high flow main nozzle, the nozzle gap can be conveniently and quickly adjusted according to the fabric characteristics, combined with a high head main pump, to achieve high flow dyeing and improve leveling effect.

2. Multiple special designs have achieved high load capacity and low bath ratio 1:4-6 operation of the dyeing machine. The load and bath ratio can be adjusted according to actual process conditions, saving water, steam, and additives.

3. The machine is equipped with a feeding nozzle and a pouring nozzle, making it easy to feed and find the seam head. The machine head door is equipped with a safety protection device.

4. The special stepped main cylinder structure allows the fabric to pile up and wriggle on the main cylinder, avoiding creases caused by prolonged compression of the fabric.

5、 Fast pressure dryer GFRD series

Product features:

1. The microprocessor precisely controls the entire drying process, effectively avoiding phenomena such as excessive dryness of yarn and yellowing of bleached yarn.

2. After dyeing is completed, the bobbin frame can directly enter the dryer to extract water, dry, and seamlessly connect without any other operations in between.

3. The equipment design adopts a compact design, greatly reducing the footprint of the equipment.

4. Adopting a fully automatic central control system for operation, with a high degree of automation and simple operation, effectively reducing the labor intensity of operators.

5. High drying efficiency, high load capacity, energy-saving and emission reduction.

6、 Stretch molding machine GF768. On the basis of technical cooperation among European enterprises, Gaoxun Group has teamed up with European designers and domestic industry experts to launch the stretching and shaping machine GF768. The stretching and shaping machine GF78 adopts Siemens programmable logic control system, which, combined with multiple patented technologies, ensures maximum safety and simplicity of operation, and maximizes the utilization of thermal and electrical energy.

Product features:

1. Uniform flow duct: The novel structural design of uniform flow duct allows hot air to be fully mixed in the duct. This design not only allows the hot air entering the nozzle to be fully mixed in the duct, but also improves the utilization rate of heat energy, thereby achieving high efficiency and energy conservation.

2. Nozzle combination: mountain shaped nozzle, trapezoidal nozzle, and crack type nozzle. The three structures can be selected according to the shaping process requirements of different fabrics, and the most suitable nozzle structure can effectively meet the goals of high-quality, efficient, and energy-saving shaping.

3. Intelligent control system: PLC intelligent control system, process parameters can be stored and distributed, and the same fabric can be used for the same process, ensuring stable quality; Remote debugging, fault diagnosis, and easy integration with various intelligent management software such as ERP.

4. Energy saving fan: The circulating fan uses energy-saving motors to meet the national standard for energy consumption, greatly reducing power consumption. Depending on the different shaping processes, it can save 5-20% of electricity.

7、 Industrialization of non-aqueous medium/anhydrous dyeing technology. After 5 years of joint research and development with Zhejiang Lvyu Company, Gaoxun Group has achieved comprehensive success in the key technology of non-aqueous medium/anhydrous dyeing in the field of tube yarn dyeing, both in equipment research and process application. It has been verified by small prototype, medium and 3 tons/day production capacity demonstration factories. The key technology of non-aqueous medium/anhydrous dyeing has been industrialized and promoted. This technology subverts traditional dyeing processes, achieving highly water-saving and salt free dyeing of reactive dyes throughout the entire dyeing process, greatly improving dyeing and fixation rates, and achieving dyeing costs and performance comparable to traditional dyeing; Has broad-spectrum and applicability for large-scale applications. Realize zero discharge of sewage.

Product features:

（1） Non aqueous low water dyeing technology for new water fiber textiles (cotton, silk, wool, linen, viscose, etc.).

1. The dye uptake rate of non-aqueous medium dyeing is almost 100%, and is independent of dye concentration.

2. The hydrolysis rate of reactive dyes is significantly lower than that of traditional water bath dyeing in non-aqueous media dyeing.

3. The non aqueous medium has good dyeing permeability and uniformity.

4. The dyeing fixation rate can reach over 95%.

（2） Low pressure waterless dyeing technology for hydrophobic fiber textiles (polyester filament, polyester staple, polyester sewing thread, polyester microfiber, etc.).

1. The dyeing and washing processes both use non-aqueous media.

2. Realize low-pressure waterless dyeing, zero sewage and zero discharge.

3. Anhydrous staining is mainly based on molecular staining, resulting in a more vivid color.

4. The fastness and dye uptake are comparable to conventional water bath dyeing. Each item has a fastness level of 4 or above.